Glade

Storage instructions

Store in a cool, dry place. Do not place unit below electrical outlets and switches.

Directions

The unit automatically sprays fragrance when a shadow has been cast upon the sensor. The light will blink rapidly for 3 seconds to warn when it is about to spray. After the unit has sprayed, in order to conserve the refill, the sensor will turn off automatically, indicated by the light flashing once every 3 seconds, and will not spray for 20 minutes. After the 20-minute lockout, the unit is in active mode and ready to detect motion. For an instant burst of Glade fragrance anytime, press the boost button on the front of the unit. Use only Glade Sense & Spray refills in this unit. Replacing Batteries: Open the front cover and insert 2 new AA batteries by matching positive and negative signs. Placement Instructions: Place the assembled unit on a flat surface where the upward spray will not be obstructed, place the unit within 1.5 metres of traffic flow. 1. To open unit, squeeze sides at the bottom and pull down from the top. 2. Pull and discard red tab to activate batteries. 3. Insert ref